Online UPS

Single Phase Online UPS offered by be servo system, the renowned brand, is designed and manufactured keeping in mind diverse specifications of different electronic equipment’s and devices. These UPS provides complete power backup for few minutes so that you can save your important data or can turn of the machine. These are very easy to connect with your electric devices or equipment’s and don’t lead to high electricity consumption for charging. To meet the different requirements of the customers, we manufacture the UPS in different models and offer them at affordable prices. Single phase online UPS is generally suitable for Diamond laser cutting machine, Computerized Sequence Embroidery Machines, Local area networks, industrial PLC and emergency & security devices, Computer & Microprocessor based industrial equipment like bank cash dispensers, telecommunication devices, Equipment such as FAX, EPABX etc.

Technical Specifications

Capacity	600 VA – 3 kva
Model/Make	Branded
Technology	SPWM, IGBT/MOSFET (for more than 72 DC volt IGBT preferred)
Input input Voltage	230 V AC, Single phase
Input Voltage Range	160 V AC TO 270 V AC
Input Frequency Range	45 TO 55 Hz
Input Over Voltage Protection	280 V AC
Input Under Voltage Protection	155 V AC
Over Voltage Cut Off	Should be offered externally
Output Voltage	230 V AC Single Phase +-1%
Frequency	50 HZ +-1%
Load Power Factor	0.8 Lag to Unity
Isolation	Output load be isolated through a transformer of same rating
Output Over Voltage Protection	245 V AC Single Phase
Output Under Voltage Protection	210 V AC Single Phase
Over Load Capacity	125% of rated load for 60 sec
Short Circuit Protection	Soft shut down should occur without blowing any fuse
Isolation	Manual Bypass Switch Should be provided of same rating
Indicators	1) Over Temperature- Required 2) Load On Battery – Required 3) Battery on Charge - Required 4) Battery Low - Required 5) Mains - On Required 6) Dc - On Required 7) Inverter - On Required 8) Inverter –Tripped 9) Output Over Voltage 10) Output Low 11) Over Load System
Static Switch	Automatic Bi-directional should take care of 100% uninterrupted transfer of load from UPS Transfer Time 85 % Inverter Efficiency > 90 %
Metering	Separate/Single Digital Meter • DC Voltage • DC Current • Charge/Discharge • Output Voltage • Output Current • Input Voltage • Digital Three/Three & Half • Frequency Meter (For Both Input and Output
Battery Period of Backup	Sealed Maintenance Free Lead Acid Battery of >= 12 V each of uniform AH rating
DC Bus Ripple	2 Hr. with 100% load < 1%
Battery Recharge Time	From Fully Discharge Condition To 100% Charged Condition< 12 hrs. Total Dc Bus Banks SINGLE
Battery Housing	Closed housing with suitable lockers
Auditable Alarm for Following Conditions	• Battery Low • Mains Failure • Inverter Under-Voltage • Inverter Over-Voltage • Over Temperature • Inverter Overload
Environmental	• Operating Temperature < 45 Deg C • Humidity 10-90 % (non-condensing) • Noise Level < 50 db. at Full Load from 1 meter Distance